Show/Hide Menu

Product Shear Valves

EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet.

Standard 1½” openings allow minimal flow restriction and a pre-drilled test plug is included for line pressure testing
Can be boss or U-bolt mounted.
E-coated for corrosion protection and AGB compatibility.
Easy-to-replace adapters slide on and off valve base without lifting the dispenser.
Adapters are available in male, female or, union connections.
Single poppet models stop product flow from the pump. Double poppet models stop flow from the pump and dispenser piping.

Fusible link closes poppet at 165.0 ºF (73.9 ºC).
Top and body material: E-coated cast iron
Poppet and O-ring: Fluorocarbon
Stem and poppet spring: Stainless steel

Dimensions

NFPA Warning

Annually test auto shut-off. Electrical supply to the submersible pump must always be disconnected before servicing meters, dispensers or emergency shut-off valves. Do not apply more than 50 psi to valve with poppet in its closed position. Valve seat and disc damage may occur.

Approvals/Certifications

Meets NFPA 30A requirements.
UL and ULC listed. UL 842A and 842B approved for E-85 alcohol/gas blends and Biodiesel.
ATEX approved, SIRA 13ATEX9035U.